The total pore volume of activated carbon is calculated by measuring the true density and particle density of activated carbon; The determination of specific surface area is based on the adsorption isotherm data within the relative pressure range of 0.05~0.35, and the BET equation is used to calculate the adsorption capacity of the single molecular layer of the sample. Based on the cross-sectional area of the adsorbate molecules, the specific surface area of the activated carbon sample is calculated. Pore volume and specific surface area are important indicators for characterizing the adsorption performance of activated carbon.
Similar Posts
Determination of sulfur capacity for Coal Based Activated Carbon
ByadminDetermination of sulfur capacity (hydrogen sulfide) for Coal Based Activated Carbon Under certain experimental conditions, the porous nature of activated carbon…
Coal-based Activated Carbon Used as electrodes for double-layer capacitors
ByadminCoal-based Activated Carbon Used as electrodes for double-layer capacitors Activated carbon is currently the main electrode material for commercialized double-layer capacitors….
Gas phase application of Coal based Activated Carbon
ByadminThe gas-phase applications of coal based activated carbon mainly include solvent recovery, oil and gas recovery, indoor gas purification, toxic gas…
Determination of Water Capacity for Coal Based Activated Carbon
ByadminDetermination of water capacity Take a certain mass of activated carbon, saturate it with water, and express the water capacity of…
The Raw Materials of Activated Carbon
ByadminThe Raw Materials of Activated Carbon The raw materials used to produce activated carbon are very rich, in general, there are the…
Principle of Removing SO2from Flue Gas Using Activated carbon
ByadminPrinciple of SO2 Removal by Activated Carbon The process of SO₂ removal by activated carbon mainly consists of physical adsorption and surface chemical…


